Description
Powerful affordable LED RGB spot for stage, disco, and decor. 18x3W RGB LED provides a powerful and very attractive light. Can be both placed on the floor and hung from a rope/stand/ceiling. Easily controlled via manual settings, auto program, sound to light, or DMX 512. Can also be synchronized with the master-slave function. Where you set the 1st spit and all others sync with it. Slim par 45 has no fan, which is absolutely silent and has no fan noise. Very affordable and good LED spot.
With this BeamZ SlimPAR45 you get the largest version of the BeamZ SlimPar series. SlimPar45 is equipped with 18 powerful and super bright 3W RGB LEDs for a very high light effect. Despite the high light intensity, everything is housed in a compact housing that fits into almost any environment. Due to the well-thought-out design, no fan is needed, which means that this lamp is completely silent during use. Control can be done via DMX or through one of the built-in programs or the sound control. SlimPar45 is delivered with a double bracket, which can therefore also function as a floor stand.
color mixing
The SlimPar45 is an RGB PAR spot, which means that each of the 18 LEDs has the colors red, green and blue (RGB). Of course, this doesn’t seem like much in terms of color, but by mixing these colors with each other, a lot of other colors and color variations can be made. For example, mix red and green and you get yellow. By playing with the intensity of the colors, a large number of colors can be made. When the 3 colors are turned on at the same time, white is created. With SlimPar45 it is therefore possible to create a colorful and dynamic light show.
Verify
SlimPar45 can be used in several ways. For example, it can be controlled via DMX via 3, 4 or even 7 channels. This way you have full control over the lamp and depending on which DMX controller is used (not included) it is possible to create your own programs. Brilliant chase effects can be programmed, especially with multiple lights. Another option is to use one of the pre-programmed programs. The lamp works on a pre-programmed program where it shows its possibilities in terms of color and effect. A third option is the sound control, where the SlimPar45 responds to sounds using a built-in microphone. With both the automatic and sound-controlled options, the lamp works completely independently and no separate control unit or similar is needed.
With the BeamZ SlimPar45, you have a powerful lamp for many applications in both fixed installation and mobile use. Bowling alleys, discotheques, clubs, restaurants, etc. can easily create the right atmosphere with the help of SlimPar45. But the SlimPar45 is also the right choice for temporary use at, for example, drive-in shows or bands.
Characteristics
- 18x 3W 3-i-1 lysdioder (RGB)
- DMX or standalone mode
- Several pre-programmed shows
- Sound activated with adjustable sensitivity
- Auto mode with adjustable speed
- DMX input/output via 3-pin XLR
- Master/slave function
- Control panel with LED display
- Delivery including double bracket
Specifications
- Number of LEDs: 18
- Colors per LED: 3 (red, green and blue)
- Beam angle:Â 12
- Field angle:Â 29
- Light intensity: 3642 lx @ 1m
- Blixthastighet: 1 – 21 fps
- Number of DMX channels: 3, 4 or 7
- Connection voltage: 230Vac/50Hz
Weights and Measures
- Dimensions: 180 x 145 x 150 mm
- Weight: 0.6 kg
| Beamz | |
| Functions | Master / Slave mode |
|---|---|
| Light source | 3-i-1-LED |
| LED colors | Red, green, blue |
| LED current | 3 |
| Number of LEDs | 18 |
| Beam angle (degrees) | 12 |
| Field angle (degrees) | 29 |
| Illuminating | 3642 lx @ 1m |
| Flash frequency/sec | 1 – 21Hz |
| DMX channels | 3, 4, 7 |
| DMX switch | 3-stifts XLR |
| The location | Automatic programs, DMX |
| Power connector | Fixed power cable |
| Power consumption | 0,2 – 0,1A |
| Power supply | 100-240VAC 50 / 60Hz |
| Dimensions (L x W x H) | 180 x 145 x 150 mm |
| weight | 0,6kg |
| Accessories | Mounting bracket, power cable |
Reviews
There are no reviews yet.